| | | | | | | | contact us
Power Drive Systems

Battery Chargers

Genaust 12V CONST CURRENT/POTENTIAL - CPCL 10-1     
Suitable for charging both lead acid and nickel cadmium batteries. Has constant potential and current limited charging output with automatic boost charge mode. The automatic boost charge mode enables quick recovery charging followed by a drop back to standby or trickle charge mode. Ideal for continuous charging of any 12V starting battery bank. (24V also available)
Genaust 24V CONST CURRENT/POTENTIAL - G/A CPCL 10-2     
Suitable for charging both lead acid and nickel cadmium batteries. Has constant potential and current limited charging output with automatic boost charge mode. The automatic boost charge mode enables quick recovery charging followed by a drop back to standby or trickle charge mode. Ideal for continuous charging of any 24V starting battery bank. (12V also available)
Genaust 24V PCB BAT. CHG. UNIT - G/A BCU 381-2     
ComAp Battery Charger 10A 12V - ICHG-120 12     

InteliCharger 120 12 The InteliCharger 120 12 is an advanced, automatic, multi-stage battery charger using ˇ°Switched mode technologyˇ± and ˇ°Battery care philosophyˇ±, suited to meet the most advanced requirements of battery manufacturers.

  • 12 V / 10 A nominal output
  • Adjustable voltage and current output
  • High efficiency ˇÝ 89 %
  • Universal AC input range
  • Automatic battery status diagnosis
  • Microprocessor controlled charging algorithm
  • Four charging stages   

    Click here for technical manual (PDF 653k)

Genaust Battery Charging Unit - BCU 381     
ComAp Battery Charger 5A 12 / 24V - ICHG-120 12-24     

InteliCharger 120 12-24  The InteliCharger 120 12-24 is an advanced, automatic, multi-stage battery charger using ˇ°Switched mode technologyˇ± and ˇ°Battery care philosophyˇ±, suited to meet the most advanced requirements of battery manufacturers.

  • 24 V / 5 A or 12 V / 6 A nominal output (dual voltage)
  • Adjustable voltage and current output
  • High efficiency ˇÝ 90 %
  • Universal AC input range
  • Automatic battery status diagnosis
  • Microprocessor controlled charging algorithm
  • Four charging stages 
  • Blink code diagnostic LED
  • Fail alarm relay, resp. signal output terminal for discharged or damaged battery and charging fail signaling.
  • Battery support: Open Lead Acid;Sealed Lead Acid;Lead Gel
    • NiCd¨CNiMH
  • Charger can be used as a standalone power supply
  • Naturally cooled
  • IP20 protection
  • DIN rail mounting

  • Click here for technical manual (PDF 653k)

ComAp Battery Charger 12V 6A - ICHG-60-12-A     

InteliCharger 60 12-A 

  • 12V advanced automatic battery charger
  • 6A current output 
  • High efficiency 
  • Cost effective 
  • Compact size
  • Sealed electronic construction
  • Robust & high reliability
  • Fully automatic operation
  • Continuously rated
  • Protection:
    • Short circuit
    • Overload
    • Over voltage
    • Over temperature
    • Reverse battery
  • Universal AC input ranges
  • Low ripple output
  • Naturally cooled
  • Voltage adjust potentiometer
  • Charger can be used as a standalone power supply. 

  • Click here for technical manual (PDF 653k)

ComAp Battery Charger 24V 10A - ICHG-240 24     

InteliCharger 240 24 The InteliCharger 240 10 is an advanced, automatic, multi-stage battery charger using ˇ°Switched mode technologyˇ± and ˇ°Battery care philosophyˇ±, suited to meet the most advanced requirements of battery manufacturers.

Main Characteristics: 

  • 24 V / 10 A nominal output
  • Adjustable voltage and current output
  • High efficiency ˇÝ 88 %
  • Universal AC input range
  • Automatic battery status diagnosis
  • Microprocessor controlled charging algorithm
  • Four charging stages  

  • Click here for technical manual (PDF 653k)

                                                                                
1
[home] [voltage regulators] [control modules] [monitoring relays] [ups systems] [battery chargers] [governors] [about us] [contact us]
Email: sales@powersystems.com.au
Phone: +61 7 3350 4594
Fax: +61 7 3881 2680
 Contractor's Licence No. 75464 James Hamilton Electrical Pty Ltd
ABN 56 010 848 389
Trading as Power Drive Systems